Atari-Forum

kodak80 wrote: ↑Fri Jan 13, 2023 9:03 am Okay, I have the mATX ST MIDI in working now with original pinout. Using an alternate optocoupler CNY17F-3 chip borrowed from one of my H4 boards.

MIDImaze 2 connects and works

Thanks for confirming this!

I wonder whether would be possible to 'convert' it to the TT Shouldn't be that big problem. Remove Coldfire specific programs, replace MiNT with the 030 setup files and edit all CNFs to check and replace eventually path changes. Haven't checked /tools/ if they're also Coldfire specific versions, bu...

Have a look at the ArchLinux /AUR packages I did years ago to achive this:
https://aur.archlinux.org/cgit/aur.git/ ... =capsimage
https://aur.archlinux.org/cgit/aur.git/ ... hanced-git

I've used OpenSCAD (https://openscad.org/) to modify this object for my needs (see https://forum.atari-home.de/index.php/topic,16285.msg257331.html?PHPSESSID=l440si7ena0vspcg4k3c3rs8cn#msg257331). This as simple as kids building blocks. Oh, thanks... I tried that but it doesn't seem to allow loadin...

Can anyone recommend a PC program to modify a 3D scanned object? I've used OpenSCAD (https://openscad.org/) to modify this object for my needs (see https://forum.atari-home.de/index.php/topic,16285.msg257331.html?PHPSESSID=l440si7ena0vspcg4k3c3rs8cn#msg257331). This as simple as kids building blocks.

It's a great pleasure to see that our beloved MiST is still under software development.
to all who are still working with it and for it!

This is interesting and let me remind my last try some weeks ago before the last firmware update. exFAT formatted SD (not microSD) was working fine before firmware update, won't work after . Then I created a fresh partition table and a new exFAT partition, voila, SD came back to life and is still wo...

SanDisk Extreme 128GB microSD "XC I" "V30" "U3" "A2" in an adaptor works fine, exFAT formatted. Ha! Just re-tried after your post and it's working now! After inserting the card to my PC again, card was still empty. Dunno what happened before. I re-partitioned...

I'm sure that this question was already answered in the past, but can't remember details so I just tried a 128GB SanDisk Ultra, labled "Class 10", "A1" and "XC I" (or XC 1 - too small to be read by old man's eyes), but it unfortunately doesn't work with my MiST. No luck...

slingshot wrote: ↑Tue Aug 23, 2022 3:47 pm

RealLarry wrote: ↑Tue Aug 23, 2022 3:12 pm Not tried for now, but is it possible then to "boot from USB" if an empty or no SD is inserted by pressing user button when powering on?

If no SD card inserted, you don't have to press anything, the firmware will switch to USB automatically.

Thanks a lot!

And if it's not clear: you can use USB or SD, but not both at the same time. The latest firmware can switch during power on if you keep pressing the user button, so you can leave the SD in its slot (thx to retrofun for that patch). That's good to know and I already wanted to ask how this works. Not...

DanyPPC wrote: ↑Sat Aug 06, 2022 8:04 am firmware_220805
- Resurrect USB storage driver (host) - an USB drive can be used instead of the SD Card

Just tried without any SD but with a 32gb USB stick and this is working great!

slingshot wrote: ↑Thu Jun 16, 2022 9:49 am Looks like the original core supports ATX and XFD files, thus adding support for this would be easy. However I cannot find any XFD files to test, somebody have one?

...see attached zip.

That looks close (the screenshot shows two, where I can only remember one, but that may be my memory!). I will try running it. Many thanks for your help RealLarry! :) You're welcome! When I read your message, I was immediately sure, because I recently packed and tested all POV demos into a virtual ...

I'm very sure that it's the Doll Animation: https://demozoo.org/productions/119282/

By attaching OS9Image.img (from a post above) as ACSI device 0, using BOOTOSK.PRG (from your previous post), and then - when prompted - inserting the OS9 boot floppy converted into a format actually suitable for Hatari (attached), I get to this: grab0002.png Very interesting...thank you for the ima...

Using your boot floppy gives the same results as if I try to boot from the HD image. If I insert the Cumana OSK disk 1 at the prompt request, I get a different error though "Boot failed, error status $00F7". Can confirm that. I imaged my working setup of an OS-9 (STE with a Gotek/FlashFlo...

I downloaded the zip file, but I can't get it working under Hatari. It stops after the OS-9/68K System Bootstrap message, with an error "Boot failed, error status $00F6" (this happens both if I attempt to boot from the HD, or the floppy image.) I am using an Atari ST, 1Mb, TOS 1.04 config...

DanyPPC wrote: ↑Wed Mar 16, 2022 2:18 pm Thanks RealLarry, it seems a very good solution, even if it costs.

You're welcome. That was my thought also: If'm able to pay ~€200 for a MiST and a handful of bucks for a used but good old MultiSync, I' should still be able to buy a needful stand (which will be still useful in some decades)

I understand, so there is no hope of being able to play these games on MIST unless you find a monitor that also spins counterclockwise. If you're having an adequate Monitor (ie MultiSync) which has a VESA mount option, you should consider buying a monitor stand which has a pivot function for 180^. ...

A little question: is it possible to have a different organization for the SD Card ? For example, I would like to have the following folders: Arcade Computer Console Tools The problem is that I can already create these folders and insert the respective cores, but if from the menu of each single cor...

troed wrote: ↑Wed Mar 09, 2022 9:59 amI have been in contact with Uwe, but since his test suite is showing the device is not following the standard I think the first order of action will be to fix the issues in upstream ACSI2STM: https://github.com/retro16/acsi2stm/issues/22

I see, thanks for the links. Will have an eye on this...

Alright, next issue ;) (Is there another support thread?) I'm trying to install HDDriver 11*. However, as soon as I reset or power cycle HDDriver no longer finds any devices. This STE has the "proper" DMA chip upgrade from Atari and works well with other ACSI devices so I don't think it's...

I am building Hatari 2.3.1 on linux. After running cmake it reports that capsimage v5 not found. Is capsimage library v5 for linux available anywhere? I went to http://www.softpres.org/download but the only v5 libraries were for Windows. Yes, there is. I've maintained capsimage (v5) for ArchLinux i...

Rightyright! Just finished the CosmosEx Debian Buster image. Anybody interested in can grab it here: https://drive.google.com/drive/folders/1Zoar6Ila8Zd7VdtHMVoulwGc-dPTDFDG Very nice. Installed it a few days ago and it worked perfectly. Thanks! Glad that it's still useful for someone. I should con...